Description
Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees – Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .420″- Lift @ Valve Exhaust: .442″- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM’s: 16″
Installation Instructions
Specifications:
| Advertised Exhaust Duration | 263 |
| Advertised Intake Duration | 253 |
| Cam Type | Cast |
| Computer Controlled Compatible | No |
| Description_ABR | Cam Lift kit |
| Description_ASM | Chevrolet:Small-Block 60 Deg V6:173 (2.8L) |
| Description_DEF | Engine Camshaft and Lifter Kit |
| Description_DES | CAMSHAFT KIT |
| Description_EXT | Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range. |
| Description_FAB | Designed for Optimum Torque and Acceleration |
| Description_FAB | Includes Hydraulic Lifters and Assembly Lube |
| Description_FAB | Major Improvement in Throttle Response and Torque |
| Description_FAB | Matched to Edelbrock Performer Intakes |
| Description_FAB | Maximum Performance From Idle through Mid-Range |
| Description_FAB | Take the Guesswork Out of Camshaft Selection! |
| Description_FAB | Use For Daily Drivers/Trucks/Vans/RVs/4x4s |
| Description_INV | Edelbrock Performer-Plus Camshaft Kit |
| Description_KEY | Edelbrock; Performer; Camshaft; lifters; RV cam; Performer-Plus; Camshaft Kit; Cam and lifter kit; hydraulic lifters; flat tappet; 3790; Chevy |
| Description_LAB | Performer-Plus Camshaft Kit for Chevy 2.8L 90 Deg V6 |
| Description_MKT | Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration @ .050 Intake: 204 degrees – Duration @ .050 Exhaust: 214 degrees – Lift @ Valve Intake: .420″ – Lift @ Valve Exhaust: .442″ – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum @ 1000 RPM’s: 16″ |
| Description_MKT | Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees – Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .420″- Lift @ Valve Exhaust: .442″- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM’s: 16″ |
| Description_SHO | { Sellable : Yes } |
| Description_SHP | { eo : 5in.} |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_TRA | In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | • In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. • Oil/additive must contain Zinc designed for use with flat tappet camshafts. • Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. • Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Exhaust Duration at .050 inch Lift | 214 |
| Exhaust Valve Lift | 0.442 |
| Grade Type | Performance |
| height | 3.75 |
| Intake Duration .050 Inch Lift | 204 |
| Intake Valve Lift | 0.420 |
| length | 26.5 |
| Lifter Materials | Hardened Steel |
| Lifter Type | Hydraulic |
| Lobe Separation | 112 |
| LTL | N |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| weight | 11.3 |
| width | 8.0 |
Explore more from our collection.
Reviews
There are no reviews yet.